How to Fix Destiny 2 Error Code ‘Currant’

Some Destiny 2 players are getting frequent disconnects with the error code ‘currant‘. In most cases, this error code is reported to occur when players try to load into any launch destination – the game just sits idle for several seconds before showing the ‘Currant‘ error code.

Currant Error Code in Destiny 2

After investigating this particular issue, it turns out that this error code can occur due to several different causes. Here’s a shortlist of potential culprits:

  • Underlying server issue – As it turns out, this particular error can also occur due to a widespread server issue that is causing instability between the game server and the end-user computers. If this scenario I applicable, there is nothing you can do other than identifying the server issue and waiting for Bungie to fix the problem.
  • TCP / IP  Inconsistency – According to some affected users, this problem can also arise in an instance where the network connection is unstable. In most cases, an issue having to do with how TCP / IP data gets assigned can be to blame for this error. To correct this problem, you’ll need to either reboot or reset your network device.
  • Corrupted Temporary data – In case the problem only started to occur recently, you might actually be dealing with some type of corrupted data. On PC, you can clear this temp data with a simple restart procedure. But if you’re seeing this error code on a console, you’ll need to perform a power cycling procedure (on PS4 or Xbox One).

Method 1: Checking for server issues

Before you try any of the potential fixes below, you can potentially save yourself a lot of troubleshooting time by checking if the Destiny 2 servers are currently dealing with an outage problem.

In case other users in your area are encountering the same ‘currant‘ error code, it’s clear that the issue is outspread. If this scenario is applicable, there’s little else you can do other than wait for Bungie to fix those issues.

Start by using services like DownDetector and Outage.Report seeing if other users are currently reporting the same error code.

Checking the server status in Destiny 2

If the investigations you just performed have revealed some underlying server issues, take a look at the fan-made status page of Destiny 2 to see if the server you’re connected to is currently affected by the server problem.

Another thing you can do is visit the official Twitter page of Bungie’s support account to see if they made any official announcements regarding the issue.

If the investigations you just performed didn’t reveal any server issues, it’s clear that the problem is occurring due to something specific to your network configuration. In this case, you can start troubleshooting with the next methods below.

Method 2: Restart or reset your router

Since the most common instance that will trigger the ‘currant‘ error code in Destiny 2 is a common network inconsistency, you should start simply by restarting your router, allowing it to re-assign network TCP / IP data to the device where you’re playing the game.

This procedure will fix those cases where a low-end router is unable to allocate enough network resources to sustain a connection with the game server. But in this case, it’s also recommended that you disconnect non-relevant devices from taking up precious Internet bandwidth.

Next, perform a simple router reboot either by pressing the power button once (on the back of the router) or by physically unplugging the power cable from the power outlet.

Restarting your router/modem

After you do this, wait for a full minute to ensure that the power capacitors are completely drained.

Next, power your router On again and see if the issue is now resolved. In case you are still seeing the same ‘currant’ error code while attempting to connect to an online game in Destiny 2, you should also go for a router reset.

But before you go forward with this operation, be advised that this procedure will reset any custom credential, settings, and adjustments that you previously made to your router settings – It will essentially return it to the factory settings.

If you don’t mind loosing forwarded ports, blocked/whitelisted devices and custom settings, use a sharp object (small screwdriver, toothpick, needle, etc.) to press and hold on the Reset button on the back of your router.

Press and hold the reset button until you see the front LEDs flashing at the same time. This is the signal that the reset procedure has been succesfull.

LEDs flashing at the same time

Next, reconfigure your router to restore Internet access and see if the problem is now resolved.

Note: If your ISP is using PPPoE, you will need to re-validate your ISP credentials once again.

In case the same problem is still occurring, move down to the next potential fix below.

Method 3: Power cycling your device

If the method above didn’t work for you and you have previously made sure that the error code is not appearing due to a server issue, your next target should be temporary data maintained by your platform of choice.

If you’re playing the game on a PC, a simple restart will do the job. Just restart conventionally, launch the game again once the next startup is complete and see if you’re still seeing the currant error code.

However, if you’re seeing this error on a console, as simple restart will not be sufficient. In this case, you will need to go for a power cycling procedure to clear any temp data that is preserved in-between restarts.

If this scenario is applicable, follow the instructions below to perform power cycling procedures on PS4 & Xbox One (depending on the platform where you’re seeing the error on):

A. Power cycle your Xbox One Console

  1. Ensure that your console is in idle mode, then press the Xbox button on your console. Keep it pressed for 10 seconds or until you see the front LED turning off.
    Power Off Xbox
  2. After your console is turned off, go ahead and disconnect the power cable and wait for one minute or so to allow the power capacitors time to discharge.
    Unplug Xbox One
    Unplug Xbox One
  3. Next, connect the power cable back, start up the console conventionally and see if the problem is now fixed.

B. Power cycling your Playstation 4 Console

  1. Start by making sure that your console is not in hibernation mode and it’s not doing anything that will cause data loss if interrupted.
  2. Press and hold on the power button (on your console), then keep it pressed until your console shuts off completely.
    Power cycling Ps4
  3. After you can hear the fans successfully turning off, go ahead and unplug the power cord from the power outlet and wait for 30 seconds or more in order to ensure that the power capacitors are drained.
  4. Next, restore power to your console, wait for the next startup to complete, then launch Destiny 2 and see if the problem is now fixed.
ABOUT THE AUTHOR

Kevin Arrows


Kevin Arrows is a highly experienced and knowledgeable technology specialist with over a decade of industry experience. He holds a Microsoft Certified Technology Specialist (MCTS) certification and has a deep passion for staying up-to-date on the latest tech developments. Kevin has written extensively on a wide range of tech-related topics, showcasing his expertise and knowledge in areas such as software development, cybersecurity, and cloud computing. His contributions to the tech field have been widely recognized and respected by his peers, and he is highly regarded for his ability to explain complex technical concepts in a clear and concise manner.