Resolving Error 0xea On Epson Expression Printers

This is one of the most common errors that occurs when the carriage caddy is jammed due to the packaging material being stuck, or if the cartridges are not seated properly. This error is usually on new printers when it’s first being setup; probably because the person setting up has made a mistake in properly configuring or installing it.

A quick look inside keeping in mind the two causes above and addressing them will resolve the issue. In General, here’s what you need to do to fix the issue open up the printer and ensure there is no material, tapes, or anything else stucked inside and the cartridges are seated in properly.

If reseating cartridges does not help, turn the printer off, take out the cartridges and inspect them carefully to see if any material is left over on the cartridges.

If no material is found, reseat the cartridges and check again.

If you still receive the 0xea error then contact the retailer you purchased the printer from for a replacement.

Kevin Arrows


Kevin is a dynamic and self-motivated information technology professional, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and administration. Superior record of delivering simultaneous large-scale mission critical projects on time and under budget.

Expert Tip

Resolving Error 0xea On Epson Expression Printers

If the issue is with your Computer or a Laptop you should try using Restoro which can scan the repositories and replace corrupt and missing files. This works in most cases, where the issue is originated due to a system corruption. You can download Restoro by clicking the Download button below.

Download Now

I'm not interested

Close